Automatic PET Bottle Blow Molding Machine
SKY-A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyor to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mold.
9). Two ways of operating: Automatic and manual.
10). Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install\test and start up.
14). Low rejection rate: Less than 0.2 percent.Machine Specification:
Main Parts List
|Clamping System||Number of cavity||cavities||4|
| ||calmping unit||KG||48000|
| ||mold stroke||mm||130|
| ||stretch stroke||mm||340|
| ||Bottom stroke||mm||30|
| ||Cavity pitch||mm||120|
| ||heating pitch||mm||55|
| ||Number of holder||PCS||114|
| ||Max. neck diameter||mm||53|
| ||Max.prefrom height||mm||140|
| ||Max.container diameter||mm||110|
| ||Max.container height||mm||340|
|heating oven||UNITS|| 4*12|
| ||box*channel|| || |
| ||Number of lamp||pcs||48|
| ||heating power||KW||57.6|
| ||installed power||KW||65|
|Air System||operating pressure||kg/cm2||7|
| ||blowing pressure||mpa||3.5|
| ||high pressure air consuming||L/min||4200|
| ||flow rate||L/min||80|
| ||heating power||HP||5|
| Machine||machine dimension||M||3.6*2.2*2.2|
| ||machine weight||KG||5000|Our Service1.Installation, debug
|PLC controller||Delta Taiwan|
|Touch screen||Wenview, Taiwan|
|Magnet valve||TPC, Korea|
|Proximity switch||SICK ,German|
|Switch power ||MEANWELL,Taiwan|
|oil valve||Li Shile|
|Clamping ||Hydraulic clamping|
|Seal ||Pipe fixed|
After equipment reached the workshop of customer, place the equipment according to plane layout we offered.We will arrange seasoned technician for equipment installation, debug and test production at the same time make the equipment reach the rated producing capacity of the line.Time for installation and debug is 15-25 days.
Our company offer technology training to customer.The content of training is structure and maintenance of equipment, control and operation of equipment.Training is in the workshop of customer.Seasoned technician will guide and establish training outline.After training, the technician of buyer could master the operation and maintenance, could adjust the process and treat different failures.
We promise that our goods are all new and not used.They're made of suitable material, adopt new design.The quality, specification and function all meet the demand of contract.We promise that the products of this line could storage for one year without adding any aseptic.
1, After checking, we offer 12 months as quality guarantee, free offer wearing parts and offer other parts at the lowest price.In quality guarantee, the technician of buyers should operate and maintain the equipment according to seller's demand, debug some failures.If you could not solve the problems, we will guide you by phone;If the problems are still can not solve, we will arrange technician to your factory solving the problems.The cost of technician arrangement you could see the cost treatment method of technician.
2, After quality guarantee, we offer technology support and after sales service.Offer wearing parts and other spare parts at favorable price;After quality guarantee, the technician of buyers should operate and maintain the equipment according to seller's demand, debug some failures.If you could not solve the problems, we will guide you by phone;If the problems are still can not solve, we will arrange technician to your factory solving the problems.The cost of technician arrangement you could see the cost treatment method of technician.
Welcome you to contact with me